| PIPE OD: 5"
NOMINAL WEIGHT (PIPE TUBE): 19.50 LB/FT
TYPICAL LENGTH SHOULDER TO SHOULDER: 31.6 FT
CALCULATED WEIGHT WITH TOOL JOINTS: 22.9 LB/FT 722 LBS/JOINT
NOMINAL WALL THICKNESS: 0.362"
AVERAGE INSIDE DIAMETER (NEW): 4.276"
NOMINAL SECTION AREA BODY OF PIPE: 5.2746 SQUARE INCHES
HOOK LOAD (NEW): 712,070 LBS
POLAR SECTIONAL MODULUS: 11.415 CUBIC INCHES
TYPE OF UPSET: IEU 80MM MIN MIU
GRADE: S135
PIPE COLLAPSE RESISTANCE (NEW): 15,672 PSI
PIPE INTERNAL YIELD PRESSURE (NEW): 17,105 PSI
PIPE TENSILE YIELD (NEW): 712,070 LBS
PIPE TORSIONAL YIELD (NEW): 74,100 FT/LBS
TOOL JOINT MANUFACTURER: OMSCO.
MATERIAL: 4137 MOD.
CONNECTION: NC50 (4-1/2” IF)
PIN & BOX OD: 6-5/8"
PIN & BOX ID: 3-1/4”
INTERNAL COATING: NONE
HARDBANDING: ARNCO
TOOL JOINT TONG LENGTHS: 9" PIN / 12"
BOX
BEVEL DIAMETER: 6-1/16"
TOOL JOINT TENSILE YIELD (NEW): 1,268,963 LBS
TOOL JOINT TORSIONAL YIELD (NEW): 51,708 FT/LBS
RECOMMENDED MAKE-UP TORQUE: 31,025 FT/LBS
MINIMUM MAKE UP TORQUE: 21,914 FT/LBS
MINIMUM DRIFT DIAMETER: 3.1/8"
CAPACITIES / DISPLACEMENT:
OPEN END DISPLACEMENT 0.340 Gal/ft
CLOSED END DISPLACEMENT 1.060 Gal/ft
CAPACITY 0.720 Gal/ft
All figures are based on data supplied by the
manufacturers and from information taken from API specification
RP7G Fifteenth Edition January 1995
MANUFACTURED TO SHELL SQAIR / NS1 SPECIFICATIONS
DSNS-SD-27 Rev 01
|
